Category Yellowstone

An FPGA-based disk controller card for the Apple II family.

Yellowstone Progress Update

I’m still working on development of an FPGA-based disk controller card for the Apple II – Yellowstone. Over the past couple of months, I spent a long while analyzing the design of the UDC disk controller. The UDC supports all…

MachXO2 RAM capacity

When 64 Kbits Is Not 8 Kbytes

This FPGA-based disk controller project is going to need every byte of on-chip memory that I can scrounge up. The datasheet says my Lattice MachXO2-1200 has 64 Kbits of embedded RAM (EBR). See the shaded column in the table above.…

microscope view of chip

Squeezing FPGA Memory

I’m developing an Apple II disk controller that’s based on the UDC disk controller design. The original UDC card had 8K of ROM and 2K of RAM, so it needs 10K of combined memory. The FPGA device I’m using for…

Yellowstone card with its DB-19 adapter

FPGA Disk Controller Next Steps

After more than two years of sporadic effort, my Yellowstone FPGA-based disk controller card for Apple II is finally working. That means the fundamental disk control capabilities are there, but there’s still a great deal of work left to do.…

Page 11 of 13